Shandong cable bridge is more and more widely used in electrical engineering or construction. Therefore, installation is a problem. We need to pay attention to the stability of the bridge. We need to pay attention to this problem in the installation. A bridge is related to many factors. The same bridge is stable and its quality is affected by many factors. Today, how can we solve the problem of cable bridge stability.

　　1. 山東橋架安裝前注意定位放線，根據施工圖確定位置，并同時畫水平線和垂直線。接下來，固定配件、螺絲和膨脹絲，固定橋架。下一步是對橋架進行調整，使其穩定在設計位置，完全固定。

　　1. Pay attention to positioning and setting out before the installation of Shandong bridge, determine the location according to the construction drawing, and draw horizontal and vertical lines at the same time. Next, fix the accessories, screws and expansion wires, and fix the bridge. The next step is to adjust the bridge so that it is stable in the design position and completely fixed.

　　2為橋梁設計被動電纜線路的需要提供不同的方向,其中,弱電系統內的電纜應分類布橋,因為這是一個更好的路由和安裝符合要求的走向,結合實際的結構和空調的位置等等

　　2. Provide different directions for the design of passive cable lines for bridges. Among them, cables in the weak current system should be arranged in different categories, because this is a better route and installation direction that meets the requirements, combined with the actual structure and the location of air conditioning, etc

　　3.橋梁框架之所以備受關注，是因為其設計結構簡單，安裝門檻低，養護費用高。清洗、檢測方便，能適應各種復雜惡劣環境。選擇橋架時，應選擇適合自己的橋架，并注意安裝步驟。

　　3. The reason why the bridge frame is concerned is because of its simple design structure, low installation threshold and high maintenance cost. It is easy to clean and test, and can adapt to various complex and harsh environments. When selecting the bridge, you should select the appropriate bridge and pay attention to the installation steps.

　　4,主動被動的電纜不能并排電纜敷設,條件是有限的,如果在同一橋商店,所以他必須采用金屬板設置在中間,這導致電纜,以避免交叉平面,橋穿過地板或膨脹接頭,應留在架構圖和相應的位置,避免施工臨時鉆空的,因為它會損害民事結構,在橋的設計,為了防止電磁輻射的干擾，應考慮橋梁的密封。

　　4. The active and passive cables cannot be laid side by side, and the conditions are limited. If they are in the same bridge store, they must use metal plates to set them in the middle, which leads to the cable, so as to avoid the crossing plane, the bridge passing through the floor or expansion joint, should be left in the structure drawing and corresponding position, and avoid the temporary construction drilling, because it will damage the civil structure, in the design of the bridge, In order to prevent the interference of electromagnetic radiation, the sealing of bridge should be considered.

　　以上是山東電纜橋架制造商為大家總結的，橋梁的穩定性和做工程一定要選擇好的橋梁產品，從基礎到避免以后出現問題，韓捷大橋是。一切可靠，我們從每一個生產環節進行監控，確保生產的健康，從每一個環節努力維護客戶的利益，使每一個客戶的投入生效。

　　The above is the summary of Shandong cable bridge manufacturer. For the stability of bridges and the construction of projects, good bridge products must be selected. From the foundation to avoid problems in the future, Hanjie bridge is. Everything is reliable. We monitor every production link to ensure the health and environmental protection of production, and strive to safeguard the interests of customers from every link to make every customer's input effective.