判斷電纜橋架的耐火等級，主要依據以下方法：

　　The fire resistance rating of cable trays is mainly determined by the following methods:

　　1.查看產品標識與說明書

　　1. Check the product identification and manual

　　· 合格的電纜橋架產品通常會在外殼、銘牌或包裝上明確標注耐火等級，如F1、F2、F3、F4（對應GB 29415-2013標準）或NI、NII、NIII（對應/T 10216-2013標準）。

　　·Qualified cable tray products are usually clearly marked with fire resistance ratings on the shell, nameplate, or packaging, such as F1, F2, F3, F4 (corresponding to GB 29415-2013 standard) or NI, NII, NIII (corresponding to /T 10216-2013 standard).

　　· 產品說明書也會詳細說明其耐火性能、適用場景及對應的耐火時間。

　　·The product manual will also provide detailed information on its fire resistance performance, applicable scenarios, and corresponding fire resistance time.

　　2.檢查材料與涂層

　　2. Check materials and coatings

　　· 防火涂料涂層：耐火橋架表面通常涂覆有防火涂料，涂層厚度是影響耐火性能的關鍵因素。可通過測厚儀測量涂層厚度，一般要求防火涂層厚度不低于500μm。

　　·Fireproof coating: The surface of fire-resistant bridge frames is usually coated with fire-resistant coating, and the thickness of the coating is a key factor affecting the fire resistance performance. The thickness of the coating can be measured by a thickness gauge, and it is generally required that the thickness of the fireproof coating is not less than 500 μ m.

　　· 非金屬耐火材料：部分橋架采用非金屬耐火材料（如玻璃纖維、陶瓷纖維等）作為內層或夾層，這些材料的性能和厚度也會影響耐火等級。

　　·Non metallic refractory materials: Some bridge frames use non-metallic refractory materials (such as glass fiber, ceramic fiber, etc.) as the inner or interlayer, and the performance and thickness of these materials will also affect the fire resistance level.

　　3.查閱檢測報告

　　3. Refer to the testing report

　　· 要求供應商提供第三方檢測機構出具的耐火性能檢測報告，報告中會明確標注橋架的耐火等級、試驗條件（如供火溫度、持續時間）及檢測結果。

　　·Suppliers are required to provide a fire resistance performance testing report issued by a third-party testing agency, which will clearly indicate the fire resistance level, testing conditions (such as supply temperature and duration), and testing results of the bridge.

　　· 檢測報告應符合GB 8624-2012《建筑材料及制品燃燒性能分級》、GB 29415-2013《耐火電纜槽盒》或/T 10216-2013《電控配電用電纜橋架》等標準。

　　·The testing report should comply with national standards such as GB 8624-2012 "Classification of Combustion Performance of Building Materials and Products", GB 29415-2013 "Fire resistant Cable Tray" or /T 10216-2013 "Cable Trays for Electrical Control and Distribution".

　　4.觀察結構與工藝

　　4. Observe the structure and process

　　· 耐火橋架的結構設計（如是否有封閉式蓋板、通風孔數量與大小）會影響熱量傳遞和耐火性能。封閉式結構或通風孔較小的橋架通常耐火性能更好。

　　·The structural design of fire-resistant cable trays (such as whether there are enclosed cover plates, the number and size of ventilation holes) will affect heat transfer and fire resistance performance. Bridges with enclosed structures or smaller ventilation holes usually have better fire resistance.

　　· 制造工藝的精細程度（如焊接質量、涂層均勻性）也與耐火等級相關，工藝良好的橋架能更好地抵御火災高溫。若對電纜橋架的耐火等級存疑，建議咨詢消防工程師或檢測機構，以確保產品符合實際使用場景的要求。

　　·The level of precision in manufacturing processes, such as welding quality and coating uniformity, is also related to the fire resistance rating. Bridge structures with good craftsmanship can better resist high temperatures caused by fire. If you have doubts about the fire resistance rating of cable trays, it is recommended to consult a professional fire engineer or testing agency to ensure that the product meets the safety requirements of actual usage scenarios.

　　本文由  濟南電纜橋架  友情奉獻.更多有關的知識請點擊  http://www.12xw.com/  真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Cable Bridge For more related knowledge, please click http://www.12xw.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.